Clipper Milling Cum Chasing Machine
Following the stupendous success of its fore-runner CLIPPER, an advanced version CLIPPER-II was introduced with several new and exciting features making it the most versatile among the all conventional milling machines.
Features
BED - Heavy graded C. I. bed, stress relieved, hand-scraped and ribbed, with ISO trapezoidal profile.
HEADSTOCK - Heavy walled, fitted with phosphor bronze worm - wheel and hardened and ground shafts, firmly seated on bed.
LEAD - SCREW - Alloy steel, precision machined, self-cleaning.
FORWARD DRIVE - 2 Speeds, belt driven through a heavy-duty helical gearbox driving the lead - screw.
Advantages
Cumbersome clutch-Type feed box replaced by an improved compact drive system, also resulting in reduction in length by 850 mm.
· Reduction in number of moving parts, hence lower maintenance.
· Wider PB worn-wheel driven by multi-start worm for better arc of contact, hence longer life.
· Larger dia, self-cleaning lead-screw.
· Machine suitable for milling of all CTC machines up to 13 inch (330 mm) dia without changing any gear simply shift the gear by means of a lever.
· All controls are mounted on an overhead, adjustable panel for ease of operation.
Specifications
|
Overall Dimensions |
|
|
Length |
2630 mm (8.50 feet) |
|
Width |
1220 mm (4.00 feet) |
|
Height |
1800 mm (6.00 feet) |
|
Weight |
|
|
Gross (approx) |
2600 KG. |
|
Net (approx) |
2000 KG. |
|
Motors |
|
|
Forward Feed |
0.56 KW (0.75 HP) / 925 RPM |
|
Reverse Feed |
1.12 KW (1.50 HP) / 925 RPM |
|
Milling Cutter |
0.75 KW (1.00 HP) / 925 RPM |
|
Coolant Pump |
0.10 KW (0.13 HP) / 2900 RPM |
|
Cutter Auto Feed Retract |
------ |
|
TOTAL |
2.53 KW (3.38 HP) |
|
No of speeds of lead screw |
Two forward and one rapid reverse |
Accessories
CHECKMATE - A handy gadget specially developed by T&I enable you to measure accurately the difference of depth between milling and chasing grooves. An important factor for good CTC cuts. The kit includes an adjustable microscopic scale to measure the shoulder and slope length for maintaining correct shoulder to slope ratio. A must for every roller sharpening workshop and factory.
MOBILE CRANE - A specially designed crane for loading, unloading and carrying CTC rollers. Mounted on poly wheels with efficient steering mechanism for ready maneuverability. Built-in wire rope winch.
ROLLER CHECKING JIG - For checking the meshing of CTC rollers. Mobile mounted on castor wheels. Jig is suitable for roller upto 48" width.
TOOL & CUTTER GRINDER - A special purpose machine for regrinding of CTC Chasers and Milling Cutters. Complete with 0.5 HP / 3000 RPM Motor and Starter. Mounted on fabricated steel pedestal.