Dynam Automatic Milling Machine
Inspired by CLIPPER-II performance, T&I has come forward with yet another startling innovation -DYNAM Electro Control Automatic Milling Machine. Dynam comes with all the advanced engineering features of CLIPPER-II plus many more. Its fully automatic control system ensures complete error free milling even when proper attention is absent.
Features
BED - Heavy graded C. I. bed, stress relieved, hand-scraped and ribbed, with ISO trapezoidal profile.
HEADSTOCK - Heavy walled, fitted with phosphor bronze worm - wheel and hardened and ground shafts, firmly seated on bed.
LEAD - SCREW - Alloy steel, precision machined, self-cleaning.
FORWARD DRIVE - 2 Speeds, belt driven through a heavy-duty helical gearbox driving the lead - screw.
Specifications
|
Overall Dimensions |
|
|
Length |
2760 mm (9.20 feet) |
|
Width |
1260 mm (4.25 feet) |
|
Height |
1500 mm (5.00 feet) |
|
Weight |
|
|
Gross (approx) |
2600 KG. |
|
Net (approx) |
2000 KG. |
|
Motors |
|
|
Forward Feed |
0.56 KW (0.75 HP) / 925 RPM |
|
Reverse Feed |
1.12 KW (1.50 HP) / 925 RPM |
|
Milling Cutter |
0.75 KW (1.00 HP) / 925 RPM |
|
Coolant Pump |
0.10 KW (0.13 HP) / 2900 RPM |
|
Cutter Auto Feed Retract |
0.03 KW (0.05 HP) |
|
TOTAL |
2.56 KW (3.43 HP) |
|
No of speeds of lead screw |
Two forward and one rapid reverse |
Advantages
TIME SAVING - Milling time is reduced by more than 25%
VASTLY IMPORVED QUALITY- Accurate, automatic indexing and cutter movement.
LABOUR SAVING - Since one person can operate a chasing machine while the DYNAM takes care of the milling.
Auto cutting - uniformly in milling depth.
Auto indexing - improves quality as indexing error is impossible.
Auto Tool Retracting, reversing & Resetting - saves time and labour.
Full automation, cutting down milling time by more than 25%.
Auto recycling and auto stop.
Manual back up for emergency operation
Accessories
CHECKMATE - A handy gadget specially developed by T&I enable you to measure accurately the difference of depth between milling and chasing grooves. An important factor for good CTC cuts. The kit includes an adjustable microscopic scale to measure the shoulder and slope length for maintaining correct shoulder to slope ratio. A must for every roller sharpening workshop and factory.
MOBILE CRANE - A specially designed crane for loading, unloading and carrying CTC rollers. Mounted on poly wheels with efficient steering mechanism for ready maneuverability. Built-in wire rope winch.
ROLLER CHECKING JIG - For checking the meshing of CTC rollers. Mobile mounted on castor wheels. Jig is suitable for roller upto 48" width.
TOOL & CUTTER GRINDER - A special purpose machine for regrinding of CTC Chasers and Milling Cutters. Complete with 0.5 HP / 3000 RPM Motor and Starter. Mounted on fabricated steel pedestal.